Overview
Our sharpening service will provide a good serviceable edge on the blade. The result is typically “very sharp” with a small secondary bevel and a bit of an “apple seed” profile. The resulting edge is somewhat dependent on the particular blade. Some blades will take and hold sharper edges than others and the thickness of the blade will determine how wide the bevel will need to be. We adjust the angle of the edge to suit the specific blade and attempt to get as close to a bevel-less edge as possible without marring the surface of the blade.
The Sharpening Process
The sharpening service is done with a belt sander. The process involves many passes with sanding belts of various grits. The blades are rested between passes to prevent them from becoming hot and damaging their temper. By default we will sharpen as much of the blade as possible including any false edges if appropriate. If you have a different preference, feel free to make that request in the special instructions at check out. We can sharpen only the last half or third of an edge, for example. Our sword sharpening expert has personally sharpened several thousand swords at this point, so will provide you with a professional service.
What the Service is Not
The resulting edge will be “sword sharp” not razor sharp. Our goal is to provide you with a usable edge for cutting practice that will hold up to some use and not require constant re-sharpening. In other words, we intend to provide you with a serviceable weapon, not a personal grooming implement. The service will not provide a completely bevel-less edge. To create that type of edge will necessarily scratch up the blade surface and we lack the machinery and time to provide a full re-polishing of a blade’s surface. A service of that nature would be significantly more expensive as a great deal more time would be required. We do not offer this type of service at this time.
Disclaimer
We make no guarantee that the resulting edge will meet with your expectations. Every blade is different and some will take and hold a sharper edge than others, due to the blade material, heat treatment or geometry. Some customers can also have incorrect assumptions about sword sharpness and improper expectations as a result. All we can say for sure is that the resulting edge will be sharper than the default edge, in most cases, significantly so. We can not provide any refunds for the service once it has been completed, so consider it to be provided “as is”. That being said, if you are unhappy with the product for any reason, we do still allow you to return the item for a full refund, including the sharpening costs under our normal return policy. This does not apply to special sharpening requests, for example if we sharpen something specially for you that does not normally list that option on our site. The vast majority of our customers are happy with the results of the service, so as long as you keep the above mentioned in mind, we are confident you will be pleased with the results as well.
Riley s. –
Decent out of box fit Just received this helmet, no fight test yet. Feels thick, but the weight distributes nicely. Only problem is the liner that was included came with a busted seam so I can’t use it until I stitch it up, for fear of it tearing further. -1star for damaged goods.
Isak –
Great Great Bascinet, especially for the price The photos really do not do it justice. The medial ridge and “cone” are very well defined, the faceplate is slightly pointed and not as round as it looks. Very menacing. feels light in the head and has good visibility and breathability but I intend to drill the visors ventholes a smidge wider. Leaps and bounds ahead of the GDFB bascinet lineup which are in many cases unwearable. Also the only out of box 100% legal for ACL, adrian empire, or sca combat with the addition of a neck strap.
The liner on mine also ripped out almost immediately at the front but it seems of good quality canvas/padding. Not a problem since I’m on the fence of going for closed cell foam and an arming cap or to sew it in the right way with waxed cordage instead of cotton thread.
The vervels aren’t set up for any of the aventails offered here but are perfect for cutting the hood off one of my old coifs
alex valice –
Insane durability and pairs with aventail perfectly.
Poor breathing holes and okay visibility
Needs holes to be drilled out
Jeramy Rich (verified owner) –
I saw the warnings about drilling out the breathing holes which isn’t a problem since I could fix that. What disappointed me was when I couldn’t get the helmet on my head because the right base had been slightly bent in and the visor was as well (like someone stood on it). That was a task getting it straightened out. Which impressed me how difficult it was which speaks to the durability of the helmet. Once I got it put back together and on I also noticed that the visor sits about a quarter of an inch too high (holes for the hinge rivets need to be lower) making it impossible to see (more than normal). I solved that by drilling some new holes which was not easy. While I’m impressed by the durability, weight distribution, and menacing appearance. I’m only giving it three stars because of the amount of work it took to get it right and the visor now having extra holes in an area it shouldn’t.